Usa Welding Rod

Nov 16, 2011













INEGAS G1 RG-45 3/32 x 36-Inch on 10-Pound Tube Copper Coated Rod for Oxyfuel Welding


INEGAS G1 RG-45 3/32 x 36-Inch on 10-Pound Tube Copper Coated Rod for Oxyfuel Welding


$36.99


RG-45 Copper Coated Rod For Oxy-Fuel welding on steel plate, sheet and pipe where strength up to 45 ksi is required. Meets AWS A5.2:R45 For Product Data sheet and MSDS please visit www.ine.it…

Forney 30705 E7018 Welding Rod, 3/32-Inch, 5-Pound


Forney 30705 E7018 Welding Rod, 3/32-Inch, 5-Pound


$13.74


The Forney 30705 7018 Mild Steel Low Hydrogen Welding Rod produces quality results on low amperage DC welders and higher amperage AC welders. Suitable for all positions on hard enable steels without preheating. Good on cold rolled steels without preheating. Good on cold rolled sheets that do not react well with conventional rod. The low hydrogen content reduces cracking and peeling of the weld…

INEGAS G1 RG-45 1/16 x 36-Inch on 10-Pound Tube Copper Coated Rod for Oxyfuel Welding


INEGAS G1 RG-45 1/16 x 36-Inch on 10-Pound Tube Copper Coated Rod for Oxyfuel Welding


$55.01


RG-45 Copper Coated Rod For Oxy-Fuel welding on steel plate, sheet and pipe where strength up to 45 ksi is required. Meets AWS A5.2:R45 For Product Data sheet and MSDS please visit www.ine.it…

INETIG 13.7 ER70S-3 5/32 x 36-Inch on 10-Pound Tube Copper Coated Tig Rod for Welding Mild Steels


INETIG 13.7 ER70S-3 5/32 x 36-Inch on 10-Pound Tube Copper Coated Tig Rod for Welding Mild Steels


$36.59


ER70S-3 Copper Coated Tig Rod designed for welding carbon and carbon-manganese steels with tensile strength up to 510 MPa. Applications include tanks, boilers, steel structural works, earthworks and construction works. It is used in root pass and to support the welding when no back pass is possible. Excellent mechanical and toughness properties when in low temperature conditions. For Product Data…

Dowsing Rod Copper -Solid Material 99% - Ghost Hunting, Divining Water, Gold, Buried Items, etc. Instructions and Video Sources Included - 5x13 Inch - Non-toxic


Dowsing Rod Copper -Solid Material 99% – Ghost Hunting, Divining Water, Gold, Buried Items, etc. Instructions and Video Sources Included – 5×13 Inch – Non-toxic


$19.95


‚óŹ PLEASE BE CAREFUL OF ILLEGAL SELLERS! Copper is an expensive metal and unfortunately, some of the sellers prefer using COPPER COATED rods instead of solid copper material. What is wrong with copper coated rods? Factories usually produce copper coated steel rods for a purpose of gas welding. Size and thickness of these gas welding rods are very suitable for creating dowsing rods. Lead is…

TEMCo GONG AR500 Steel Shooting Target 1/2 Thickness Plate Circle Round


TEMCo GONG AR500 Steel Shooting Target 1/2 Thickness Plate Circle Round



Size Deviation: Actual part may deviate from specified measurement by +/- 0.120″. Edge Bevel: Edges may exhibit a bevel of upto +/- 15 degrees or may include original mill edge, which will contain a radius. Surface Features: Surface may contain pits, scratches and light gouges typical of handling heavy plate. Surface will not be prepared in any way and comes with raw mill finish. Cut Process: Liqu…


TEMCo AR500 Steel 1/2 Knock Over Shooting Target


TEMCo AR500 Steel 1/2 Knock Over Shooting Target



Size Deviation: Actual part may deviate from specified measurement by +/- 0.120″. Edge Bevel: Edges may exhibit a bevel of upto +/- 15 degrees or may include original mill edge, which will contain a radius. Surface Features: Surface may contain pits, scratches and light gouges typical of handling heavy plate. Surface will not be prepared in any way and comes with raw mill finish. Cut Process: Liqu…








Share and Enjoy:
  • Print this article!
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • BlinkList
  • Blogosphere News
  • Diigo
  • Fark
  • Faves
  • IndianPad
  • LinkaGoGo
  • LinkedIn
  • MisterWong
  • MySpace
  • Propeller
  • Reddit
  • Socialogs
  • StumbleUpon
  • Technorati
  • Tumblr
  • Twitter
  • Yahoo! Bookmarks
Posted by | Categories: Welding Gear |

Share with others

No Responses so far | Have Your Say!

Leave a Feedback

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>