Tig Weld Electrodes

Sep 11, 2011

distinction between tig &mig welding& what about stainless welding?

Are we able to use arc welding for stainless if that’s the case produce your best option, regarding electrodes for use & M/C specs.

*Stainless steels or, more precisely, corrosion-fighting off steels really are a group of iron-base alloys getting excellent potential to deal with corrosion. These steels don’t rust and strongly resist attack by a lot of fluids, gases, and chemicals. Most of the stainless steels have good low-temperature toughness and ductility. Many of them exhibit good strength qualities and potential to deal with scaling at high temps.

Stainless steels could be welded using a number of different methods for example shielded metal arc welding, gas tungsten arc welding, and gas metal arc welding.

-For additional particulars:::::

http://world wide web.key-to-steel.com/Articles/Art97.htm

-Stainless welding could be became a member of by most welding processes. Cleaning from the stainless base metal is suggested just before welding in addition to publish weld cleaning of parts. Weldability and weld procedure employed for stainless steels is dependent about the base metal very structure (martensitic, ferritic, or austenitic).

*For several kind of work TIG is needed, like welding chrome moly for many racing organizations. Intricate work, like gunsmithing can also be suitable to TIG. TIG is used by lots of auto restorers preferring a far more precise, perfect finish that needs virtually no finish work. TIG is most much like gas welding in technique, therefore if you must have done oxy-fuel welding, TIG ought to be an all natural transition.

MIG is needed legally by insurance providers in lots of places for structural repair of automotive frames. MIG can also be much simpler to understand and faster to weld. For doing other kinds of welding, like sheet metal, it’s really a few personal preference. To have an auto body repair center or perhaps a novice welder, a MIG is a great, practical all-around welder.

*The MIG weld process, or Metal Inert Gas weld, fuses the metal by heating by having an arc. Using this type of weld, the arc is positioned between your filler metal electrode and also the work piece. Shielding is supplied by outwardly provided gas or gas blends. A TIG weld or Tungsten Inert Gas, however, operates by joining metals through the entire process of heating with tungsten electrodes that don’t end up part of the completed weld. The procedure utilizes argon or any other inert gas blends as shielding and filler metals are hardly ever used.

A few of the fundamental variations between your two kinds of welds are that MIG welding is faster than using TIG welding, as utilizing TIG welding requires more skill that MIG welding. A good wire can be used within the MIG Flux Cored Arc Welding-Gas Shield (FCAW-G) while TIG utilizes a flux cored electrode.

Another apparent difference is the fact that TIG uses Tungsten to transport the arc, along with a user of the TIG welder will need sufficient experience of the craft of welding. A MIG weld user, meanwhile, can transport on working despite as being a novice welder.

Overall, while both MIG and TIG are gas shielded arc welding processes, the main difference lies in the manner the filler metal is put into produce the weld. Using the TIG process, the arc is produced from a tungsten electrode mounted inside a hands-held torch and also the work piece to become welded. The welder initiates the arc by way of a switch. The filler metal, as a hands held fishing rod, will be put into the weld puddle through the welder because the torch is altered across the joint which is welded. The MIG process utilizes a filler metal the electrode and also the arc is produced once the filler metal makes connection with the job surface.








Blue Demon ERNI55 X 1/16 X 36 X 1# Tube nickel 55 cast iron TIG welding rod


Blue Demon ERNI55 X 1/16 X 36 X 1# Tube nickel 55 cast iron TIG welding rod


$51.46


Ni55FC-G is a composite metal cored wire for repair and joining of cast iron metals. The deposit, which is approximately 53% iron and 45% nickel, provides an excellent match for the coefficient of expansion exhibited by cast irons….

KSEIBI 331215 300 Amp Welding Electrode Holder American Design


KSEIBI 331215 300 Amp Welding Electrode Holder American Design


$13.19


Features: *Design protects electrode from damage. *High durability spring-loaded jaws approve rods up to 1/4 inch. *Specially design for heavy duty works with a comfortable handle. *Well-organized grooved jaw for firm grip of rods in 45°, 90° to 180° positions. *Fully insulated handle for both high conductivity and improved cable connections. High quality electrode holder. *Well-known for inten…

ABN TIG Welding Tungsten Electrodes 2% WT20 Thoriated Red 1/16 x 7 (1.6mm x 175mm) 10 Pack


ABN TIG Welding Tungsten Electrodes 2% WT20 Thoriated Red 1/16 x 7 (1.6mm x 175mm) 10 Pack


$11.49


The ABN TIG Welding Tungsten Electrodes 2% Thoriated Red 1/16″ x 7″ W T20 (1.6mm x 175mm) 10 Pack is a must have for any welder. Ideal applications include carbon steel, stainless steel, nickel, nickel alloys, titanium and copper alloys. Generally used for DC electrode negative or straight polarity applications. Includes 10 1.6mm x 175mm tungsten EWLa-2 electrodes with a grounded finish. The elect…

GTAW TIG Welding Tungsten Electrodes America Alloy(AA) 10pcs 2% Lanthanated EWLa-2 / WL20 Tungsten Electrode(Sky Blue) 1/8 X 7 / 3.2 X 175mm


GTAW TIG Welding Tungsten Electrodes America Alloy(AA) 10pcs 2% Lanthanated EWLa-2 / WL20 Tungsten Electrode(Sky Blue) 1/8 X 7 / 3.2 X 175mm


$27.95


None other than America Alloy(AA) provides you with AA grade tungsten electrodes! Welder’s choice and tested good! Our Lanthanated EWLa-2 / WL20 Tungsten Electrode TIG welding tungsten electrodes will exceed your expectation. Crafted to the exact specification, welders can rely on our high performance electrodes to meet your welding application requirement, as always. With a low burn-off rate and …

TIG Welding Tungsten Electrodes America Alloy(AA) 10pcs 2% Ceriated EWCe-2 / WC20 Tungsten Electrode(Grey) 1/16 X 7 / 1.6 X 175mm


TIG Welding Tungsten Electrodes America Alloy(AA) 10pcs 2% Ceriated EWCe-2 / WC20 Tungsten Electrode(Grey) 1/16 X 7 / 1.6 X 175mm


$11.99


None other than America Alloy (AA) provides the AA grade Tungsten, finest tungsten as you can get from the market crafted by one of the largest tungsten OEM manufacturer! OEM/ODM/Private label is accepted. Welder’s choice, tested good and reliable quality. High grade tungsten electrodes for Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, 2% Ceriated EWCe-2 / WC20 …



















Let me show you Weld mug - Black / One Size


Let me show you Weld mug – Black / One Size


$11.00


Let me show you Weld mug…

Share and Enjoy:
  • Print this article!
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • BlinkList
  • Blogosphere News
  • Diigo
  • Fark
  • Faves
  • IndianPad
  • LinkaGoGo
  • LinkedIn
  • MisterWong
  • MySpace
  • Propeller
  • Reddit
  • Socialogs
  • StumbleUpon
  • Technorati
  • Tumblr
  • Twitter
  • Yahoo! Bookmarks
Posted by | Categories: Welding Gear | Tagged: , , , |

Share with others

No Responses so far | Have Your Say!

Leave a Feedback

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>