Standard Abrasives Flap

May 19, 2011

Choosing the right equipment is the key for steel fabrications

These days, the use of the stainless steel fabrications has increased manifold. Well, there are several advantages of the stainless steel fabrications. However, one great thing with them is that you can get a brilliant finish with the steel fabrication. But, that is not a simple task anyway. After all, you have to take care of a number of factors. First of all, you need to decide over the kind of finish that you want. This is a critical task. After all, all finishing styles don’t complement the looks. Therefore, you have to make sure that you are selecting the right type of finishing.

Once you are done with the selection of the finishing of the steel fabrications, you have to now go to prepare a list of equipments and materials required for the finish. You have to be attentive and make sure that the list of requirements is truly comprehensive. Well, the latest technologies and inventions have made things much easier for the professionals these days. Before, they had to use the grinding wheel for the first phase of weld treatment, and the resin fiber disc for the second and final step. These days, the invention of the flap discs has made it an all in one tool.

Naturally, people prefer the flap discs as they enable them to achieve the task within a single phase. At the same time, this device needs only one type of abrasive. So, the process has been made simple and cost friendly. Basically, the operator has to arrange coated abrasive on the backing pad. Another great thing with this device is that it is less likely to scratch or gouge the surface and thereby enhance the chance of getting the perfect finish.

Well, there are still chances to improve the surface finish further. There are a lot of products available in the market to improve the polish and reduce the time for finishing. For example, there are surface conditioning flap discs; unitized discs etc. There are nylon webs that are studded with the abrasive grit for the surface conditioning. The grits are available in different versions so that you can choose the right one for you. Also, you can go for the combination discs that include surface conditioning and coated abrasive into one single backing pad.

When it comes to the power tools, the angle grinder is still considered the standard tool that the professionals use. However, higher level finishes are often recommended these days and for them, you will need advanced power tools like linear belt finishing tools.

About the Author

The author of this article has expertise in steel fabrications. The articles on steel fabrications reveals the author’s knowledge on the same. The author has written many articles on steel fabrications as well.

Share and Enjoy:
  • Print this article!
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • BlinkList
  • Blogosphere News
  • Diigo
  • Fark
  • Faves
  • IndianPad
  • LinkaGoGo
  • LinkedIn
  • MisterWong
  • MySpace
  • Propeller
  • Reddit
  • Socialogs
  • StumbleUpon
  • Technorati
  • Tumblr
  • Twitter
  • Yahoo! Bookmarks

Share with others

No Responses so far | Have Your Say!

Leave a Feedback

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>